3.7 Measurement data display area
Measurement data of the measurement data file selected from the measurement data file list is
displayed. It consists of following 5 panels.
Normal panel : Main panel for measurement data display
Extension panel : Panel to display measured value (numerical value).
Logging panel : Panel for displaying logging
Operation panel : Panel to display calculation result (calculation result for the noise
Memo panel : Panel to register memo and image information for each measured data.
Registered information is retained until the subject measured data is
deleted from the measurement data list. When the subject
measurement data is deleted from the measurement data list, the
memo and image information is cleared.
To Next Page
Loading...
