2. Select (Calculation)→[Power average Calculation] on the Menu Bar.
[Average operation settings] window will be displayed.
3. On the average calculation settings dialog window, select the data files subject for the
calculation of energy average value. (selection of multiple data files is possible.) If the
measurement data files for the calculation are not imported to the measurement data file list,
such file names will not be displayed in the left side file name column.
4. Click [→] button. Selected files will be copied to the right side file name column. To delete
data file from the right side file name list column, select the file in the right side column and
click [x] button.
This window will be displayed
by the selection of
[Power average Calculation]
To Next Page
Loading...
