6. Calculation of arithmetic mean will be carried out and calculated resulfor the measurement
data will be added to the measured data file list.
File name will be 「Ave n_file name selected by above step 1」 ,where “n” after ”Ave” shows
the number of data files subjected for the calculation.
5.4 Power average Calculation
Calculate power average between multiple measurement data.
Calculation of power average can be performed for measurement data that are for the same
measurement items as listed below.
● Noise measurement data
● 1/1, 1/3 octave real-time analysis data
● FFT analysis measurement data
Calculation procedure is as follows. As an example, following explanation for the procedure
for calculation is made for the noise measurement data.
1. Import measurement data file subject for calculation to the measurement data file list and
select 1 (one) measurement data file,
To Next Page
Loading...
