5. Select [Remote operation]→[Search for the COM port] on the Menu Bar, or by clicking
[Restructuring COM port] on the Tool Bar, restructure COM port in the PC.
6. Select USB COM port number that is connected to the TYPE 6236.
If correct COM port number is unknown, open the device manager from property of the system
and then confirm the COM port number of the “USB Serial Port” by “Port (COM and LPT)” of the
communication port.
【Procedure for confirmation of the COM port】
Explanation as shown below is for the classic display style. Instruction Manual for Windows
shall be referred to for detailed explanation.
1. Open [Control Panel] from the [Start] button of the Windows menu.
2. Double click and open [System].
3. Click [Hardware] of the tag menu and then click [Device Manager].
At Port (COM and LPT), confirm the COM port of the connected USB Serial Port.
Select by
pull-down menu.
In this case, COM port
is 【COM3】
To Next Page
Loading...
