Copyright
©
2005 ACTIA - How to Use SmarTach
®
- Basic Functions - 9
English
3. How to Use SmarTach
®
- Basic
Functions
3.1 Recommendations
Drivers and employers must use SmarTach
®
in conformance
with all instructions found in modified EEC Regulation No. 3821/
85 and in this manual.
SmarTach
®
is a secured system:
• the data to be measured and recorded and then to be
checked by control authorities must be available and
reflect accurately the activities of controlled drivers and
vehicles in terms of driving, work, availability and rest
periods and in terms of vehicle speed.
• it is able to export data in such a way as to allow for later
verification of their integrity and authenticity.
To meet these security objectives:
• each driver card is strictly personal, and each driver is
allowed to possess, at one time, one valid driver card
only.
• periodic inspections of SmarTach
®
must be carried out
under any condition defined in modified EEC Regulation
No. 3821/85 (and at least once within two years of the
last inspection).
3.2 For Different Users and Smart Cards
SmarTach
®
provides selective access rights to data and
functions according to user type:
• Driver
• Company
• Workshop
• Controller
You must read completely Section 6.2 General
Instructions, where general instructions for
SmarTach
®
use can be found.
Refer to Section 6.7 Access Rights to Data
and Section 6.1 SmarTach
®
Functions.
To Next Page
Loading...
