Actia SmarTach - 6. Appendices; 6.1 SmarTach Functions

Copyright
©
2005 ACTIA - How to Use SmarTach
®
- Advanced Functions - 59
English
4.8.3 How to End a Lock
To end the lock of your company data, proceed as follows:
1. In the first level of menus, press to go to the second
level.
2. Press or as many times as necessary to go to
COMPANY LOCK.
3. Press to select COMPANY LOCK.
4. SmarTach
®
notifies you that a lock has already been placed.
The displayed date corresponds to the date at which the
marker for the start of the lock was placed.
5. Press or as many times as necessary to go to
μ²?.
6. Press to end the lock or to exit without a
change.
7. SmarTach
®
places a marker for the end of the current lock.
The date and time at which the lock end marker was placed is
displayed for a few seconds.
8. The last selected main display appears.
4.9 How Companies can Download Data
1. Connect to the SmarTach
®
front panel a tester or any other
device allowing data to be downloaded and stored on
computer storage media.
• The vehicle must be stationary.
• A card belonging to the same company than the
one having placed the current lock may be
inserted.
• The vehicle must be stationary.
• No printing operation must be in progress.
• A company card must be inserted.