Copyright
©
2005 ACTIA - In this Manual - 1
English
1. In this Manual
1.1 Subject
This document explains how drivers and companies shall use
SmarTach
®
. You will also find the general instructions you need
to bear in mind while using SmarTach
®
and your smart card.
This document is based on the amended EEC
Regulation No. 3821/85 and especially its Annex 1B and
Regulation No. 3820/85.
1.2 Symbols Used
The following symbols have been used in the present document:
1.3 Terminology
1.3.1 Abbreviations
EEC
European Economic Community
UTC
Universal Time Co-ordinated
1.3.2 Glossary
Annex 1B
Annex 1B to the amended EEC Regulation No. 3821/85.
Authenticity
Assurance that the source and content of data are truly that
indicated.
Assurance that the tachograph, smart card and speed sensor
are truly that indicated.
Confidentiality
Ownership of data that is not to be revealed.
Symbol Description
Prerequisites
Note
Reference to another part of the present
document or to other documents
Warning for the reader
Table 1
To Next Page
Loading...
