Actia SmarTach - Precautions for Use; General; About Smartach Printer; Smartach Maintenance

70 - Appendices - Copyright
©
2005 ACTIA
English
6.3 Precautions for Use
6.3.1 General
1. All actions on SmarTach
®
must be made when the vehicle is
stationary (except for acknowledging warnings).
2. Do not let liquid or foreign objects get inside SmarTach
®
.
3. Clean the front panel using a soft cloth moistened with a
cleaning product designed specially for cleaning plastics, or a
soft damp cloth.
4. Apply the cleaning product to the cloth, not directly to the
front panel.
5. Only insert tachograph cards. Any other object may damage
the card slot.
6. If SmarTach
®
cannot read the card, clean the card using a
soft cloth.
6.3.2 About SmarTach
®
Printer
• The printer head substrate surface is coated with glass, so
mechanical stresses, shocks, dust and scratches should be
avoided to prevent damage.
• Avoid condensation. If condensation occurs, do not use the
printer until it has disappeared.
• If a sticking sound is heard during printing, check and adjust
the paper feed mechanism with the printer’s door.
• If paper residue becomes stuck to the printer head, print
quality is degraded. If this occurs, clean the printer head with
alcohol. Do not use sandpaper as this will destroy the heat
elements.
• Remove regularly paper residue from the inside of the printer
using a soft cloth.
6.4 SmarTach
®
Maintenance
6.4.1 How to Change the Paper Roll
Refer to Section 6.4 SmarTach
®
Maintenance.
Paper rolls must have been certified for use in
SmarTach
®
by ACTIA.
Approval mark on ACTIA paper is proof of
compliance.