Actia SmarTach - Access Rights to Data

80 - Appendices - Copyright
©
2005 ACTIA
English
6.7 Access Rights to Data
SmarTach
®
users are identified thanks to their smart card.
SmarTach
®
gives them selective access rights to functions and
data according to their type and/or identity.
SmarTach
®
can be in one of the four following operating modes:
• Operational mode,
• Control mode,
• Calibration mode,
• Company mode.
The following table gives the operating mode for SmarTach
®
in
relation to the type of valid smart cards inserted in the left and
right slots:
* In these cases, SmarTach
®
shall use only the card inserted in
the left slot (driver).
Operating mode
Left slot (driver)
Empty
Driver
card
Controller
card
Workshop
card
Company
card
Right slot (co-driver)
Empty Operational Operational Control Calibration Company
Driver card Operational Operational Control Calibration Company
Control
card
Control Control Control* Operational Operational
Workshop
card
Calibration Calibration Operational Calibration* Operational
Company
card
Company Company Operational Operational Company*
Table 37