Actia SmarTach - Driving W;O Card; Time Overlap

86 - Appendices - Copyright
©
2005 ACTIA
English
6.9.3 !ªª TIME OVERLAP
Event / fault:
Time conflict.
Causes and actions (having acknowledged warning)
Date and time of last withdrawal of driver card are later than the
current date and time of SmarTach
®
in which the card is
inserted.
• This case arises when the clock of the last tachograph in
which the card was used is ahead of the internal clock in the
current SmarTach
®
.
• After having acknowledged the warning, SmarTach
®
does
not allow complete manual entry of activities between
withdrawal of the card and its current insertion.
6.9.4 !¢© DRIVING W/O CARD
Event / fault:
Driving without an appropriate card.
Causes and actions (having acknowledged warning)
There are several possible causes:
You have a driver card. You have a company card.
Case 1: Vehicle moves off while your
driver card is not inserted in the left
slot of SmarTach
®
:
• Stop vehicle and withdraw any
cards already in SmarTach
®
.
• Insert driver card in the left slot of
SmarTach
®
.
Stop vehicle.
Case 2: Vehicle moves off with
undesirable combination of cards
inserted in SmarTach
®
.
You may only drive if your driver card
is inserted in the left slot and if either
another driver card or no card is
inserted in the right slot.
• Stop vehicle and withdraw any
cards which cause a problem.
• Insert driver card in the left slot of
SmarTach
®
.
• Return the other cards to their
owners, or send them to the
address marked on the back of the
cards.
Table 44
You may only drive if you
have a driver card or
workshop card.