Actia SmarTach - 4.3.2 Events and Faults

Copyright
©
2005 ACTIA - How to Use SmarTach
®
- Advanced Functions - 31
English
4.1.8 Default Activity
Companies can set driver and co-driver activities automatically
selected by default by SmarTach
®
when ignition is turned on or
off. The following choices are possible:
To set the driver and co-driver default activity, proceed as
follows:
1. In the first level of menus, press to go to the second
level.
2. Press or as many times as necessary to go to
COMPANY.
3. Press to select COMPANY.
The following section describes a function only
available to companies.
Your company card must be inserted.
Vehicle status
Driver and co-driver activity
automatically selected
Pictogram
Ignition is
turned on
Keep the current selected activity
_
Work
§
Break/Rest
¦
Availability
¥
Table 19
Ignition is
turned off
Keep the current selected activity
_
Work
§
Break/Rest
¦
Availability
¥
Vehicle status
Driver and co-driver activity
automatically selected
Pictogram
Table 19 (continued)