90 - Appendices - Copyright
©
2005 ACTIA
English
6.9.15 ·¯ SENSOR FAULT
Event / fault:
Recording equipment fault.
Causes and actions (having acknowledged warning)
There is a fault with the speed sensor.
• SmarTach
®
and the speed sensor must both be checked by a
workshop.
6.9.16 º¢ DRIVE > 4h30
Event / fault:
• 15 minutes before 4h30 continuous driving time
• 4h30 continuous driving time
Causes and actions (having acknowledged warning)
There are several possible causes:
• Continuous driving has reached 4h15.
• Stop vehicle before reaching 4h30 of continuous driving.
• Wait for 45 minutes of cumulated rest.
• Continuous driving has reached 4h30.
• Stop vehicle.
• Wait for 45 minutes of cumulated rest.
6.10 List of Pictograms Used in this Manual
6.10.1 Pictograms Defined by Annex 1B
Card/Operating Mode
Company/Company mode
¡ Controller/Control mode
£ Workshop/Calibration mode
¢ Driver/Operational mode
Activities
¢ Driving
¥ Availability
¦ Break/Rest
§ Work
Refer to Section 6.2.1. Compliance with
Regulations.
Refer to Section 6.2.1. Compliance with
Regulations.
To Next Page
Loading...