Actia SmarTach - How to Use Smartach; How to Set Smartach; Printouts Time Reference

Copyright
©
2005 ACTIA - How to Use SmarTach
®
- Advanced Functions - 25
English
4. How to Use SmarTach
®
- Advanced
Functions
The following table explains how to go from one level of menus
to another:
4.1 How to Set SmarTach
®
The following sections describe functions available to both
drivers and companies.
4.1.1 Printouts Time Reference
SmarTach
®
allows you to print your tickets referring to UTC time
reference or to Local time currently set. Default setting is printing
in UTC time.
This function is helpful for providing you with a ticket that is easy
to understand. Note that these printouts may not be provided to
authorities for control; they are for driver use only.
Printouts made while SmarTach
®
is in control mode will
automatically be in UTC time reference.
To set printing time, proceed as follows:
1. In the first level of menus, press to go to the second
level.
2. Press or as many times as necessary to go
to SETTINGS.
3. Press to select SETTINGS.
The vehicle must be stationary to access the
second level of menus.
From To Press
First level Second level
Second level First level
Table 18
SmarTach
®
automatically goes back to the upper
level if no action is executed for more than
20 seconds.