Actia SmarTach - Page 52

46 - How to Use SmarTach
®
- Advanced Functions - Copyright
©
2005 ACTIA
English
Once you have started manual entry of activities, SmarTach
®
warns
you if you do not enter any data during a certain time, as shown in the
following table.
The examples detailed in the following sections (4.7.1 to 4.7.3)
explain how you can enter activities manually, in three different
cases:
• You want to enter activities having occurred during the
current daily work period.
• You want to enter activities having occurred at the end of the
previous daily work period.
• You want to enter activities having occurred at the beginning
of the current daily work period.
By combining the examples of sections 4.7.2 and 4.7.3, you will
be able to enter both activities having occurred at the end of the
previous daily work period and at the beginning of the current
daily work period.
The data you enter manually will be stored on your
driver card only and not in SmarTach
®
.
No action for Result
30 seconds
The warning light flashes and several beeps sound until
you press a key.
60 seconds
The manual entry is interrupted and only the data
entered and validated by pressing are saved.
Table 27
The data shown on the display at the
moment of the interruption are not
stored
.
Refer to Section 4.7.1 During the Current Daily
Work Period.
Refer to Section 4.7.2 At the End of the Previous
Daily Work Period.
Refer to Section 4.7.3 At the Beginning of the
Current Daily Work Period.