76 - Appendices - Copyright
©
2005 ACTIA
English
Faults:
• Recording
equipment faults
• Date and time of beginning of fault
• Date and time of end of fault
• Card type, number and issuing Member State of
any card inserted at beginning and/or end of the
fault
• Type of fault
Storage rule: The 10 most recent faults for each
type of fault, the first fault after the last calibration
Calibration
On activation or at each calibration:
• Purpose of calibration: activation, first installation,
installation, periodic inspection
• Workshop name and address
• Workshop card number, card issuing Member
State and card expiry date
• Vehicle identification
• Parameters updated or confirmed: w
(characteristic coefficient of the vehicle), k
(constant of the recording equipment), l (effective
circumference of the wheel tyres), tyre size, speed
limiting device setting, odometer (old and new
values), date and time (old and new values)
Storage rule: Known calibration parameters at the
moment of activation of SmarTach
®
, its very first
calibration following its activation, its first calibration
on the current vehicle and the 5 most recent
calibrations.
Data recorded Recording conditions / Storage rules
Table 34 (continued)
Time adjustment
On each time adjustment performed outside
complete calibration:
• Date and time (old value)
• Date and time (new value)
• Workshop name and address
• Workshop card number, card issuing Member
State and card expiry date
Storage rule: The most recent time adjustment and
the 5 largest time adjustments
Control activities
At each control carried out:
• Date and time of control
• Control card number and card issuing Member
State
• Type of the control (displaying and/or printing and/
or SmarTach
®
downloading and/or card
downloading)
Storage rule: The 20 most recent controls
Data recorded Recording conditions / Storage rules
Table 34 (continued)
In case of downloading, the dates of the
oldest and the most recent days
downloaded shall also be recorded.
To Next Page
Loading...
