adept technology Python User Manual

Chapter 10 - System Operation
148 Adept Python Modules User’s Guide, Rev. E
Figure 10-4. DC_SETUP Program Current Configuration Screen
After you run DC_SETUP to configure each axis, you might need to run DC_SETUP again
if you:
• change your module configuration
• replace modules
You should not need to run DC_SETUP again if you replace the MotionBlox-10 amplifiers
only.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

adept technology Python Specifications

General

Brand	adept technology
Model	Python
Category	Control Unit
Language	English