Optional equipment/accessories
Page 118 of 178 DLT-V83 Series Manual V1.31 Advantech-DLoG
10.16. External CD/DVD-ROM drive (optional)
An external CD/DVD-ROM drive can be connected to the DLT-V83 via the USB
interface.
When connecting an external USB CD/DVD-ROM drive which has its own external
power supply the DLT-V83 must be disconnected from the power supply.
The CD/DVD-ROM must be powered up simultaneously or after the DLT-V83 as
otherwise this can cause start-up problems, malfunctions, or even the destruction of the
device.
Please note: Not every device classified as a USB CD/DVD-ROM is a proper
USB CD/DVD-ROM drive.
In the BIOS USB CDROM must be entered as a boot device.
The CD/DVD-ROM drive is bootable once it has been properly installed. To boot from a
CD/DVD-ROM, insert a bootable CD/DVD and start the system.
10.17. USB recovery stick (optional)
The optional Advantech-DLoG recovery stick allows images to be backed up and
restored onto the DLT-V83 when necessary (backup & recovery).
10.18. Scanner and scanner bracket (optional)
You can connect scanners to either the USB interface or the serial interface. If
connected to COM1, the scanner can be powered through the interface with a voltage
of 5 V or 12 V (option).
Use only scanners that have been approved by Advantech-DLoG.
Optional scanner brackets are available for the DLT-V83.
To Next Page
Loading...
