Configuration
Advantech-DLoG DLT-V83 Series Manual V1.31 Page 45 of 178
6.1. Configuring the DLT-V83 with Linux (optional)
The configuration of the DLT-V83 with Linux with regard to wireless networks,
touchscreen calibration, etc. is described in a separate ADLoG Linux manual.
The ADLoG Linux manual is available on the Internet at www.advantech-
dlog.com (Download menu, login required).
6.2. MS Windows operating systems (optional)
6.2.1. Setting up MS Windows
Pre-installed on flash
If a DLT-V83 with preinstalled operating system is placed into operation, this operating
system will be loaded after the BIOS system messages. System-specific device drivers
(e.g. for graphics, sound, network, touchscreen) are already installed.
In DLT-V83 units with a pre-installed operating system, the system is located on the
C partition.
Installing on flash
When a DLT-V83 is started up for the first time without a pre-installed operating system,
the user needs to carry out a number of steps that will vary depending on the system to
be installed. Refer to the relevant operating system manual for specific instructions.
6.2.2. USB recovery stick
The optional Advantech-DLoG recovery stick allows images to be backed up and
restored onto the DLT-V83 when necessary (backup & recovery).
Please contact your Advantech-DLoG sales representative if needed.
6.2.3. WES 7 and Win 7 Prof.: USB icon in the taskbar
Under WES 7 and Win 7 Professional, please observe:
Do not click on the Eject DLT-V83xx button, which fades in on the taskbar using
the Eject Media icon:
If the Eject DLT-V83xx button is clicked on:
− Malfunctions during the communication with the environment controller are
possible.
− The operating system must be restarted.
To Next Page
Loading...
