Cleaning the device
Page 132 of 178 DLT-V83 Series Manual V1.31 Advantech-DLoG
13.1. Cleaning the housing
DANGER
Hazardous voltage, electric shock from contact with live parts.
To prevent an electric shock while cleaning the device:
Switch off the DLT-V83 before cleaning.
Disconnect from the power supply.
Cleaning:
Ensure that the device is switched off and currentless.
Clean the housing with a damp cloth.
Do not use compressed air, a high-pressure cleaner or vacuum cleaner, as this can
damage the surface.
Using a high-pressure cleaner poses the additional risk of water entering the device
and damaging the electronics or display.
To Next Page
Loading...
