EasyManua.ls Logo

Advantech-DLoG DLT-V8310 - Protective Film for Touchscreen (Optional)

Advantech-DLoG DLT-V8310
178 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Optional equipment/accessories
Page 120 of 178 DLT-V83 Series Manual V1.31 Advantech-DLoG
10.20. Protective film for touchscreen (optional)
An optional protective film is available for resistive touchscreens (all DLT-V83 devices).
This film protects the touchscreen against scratches during extreme use.
NOTICE: Physical damage
Do not attach the protective film to damaged or worn out touchscreens. Air bubbles
can get trapped and cause malfunctions.
The ordered protective film is normally attached to the DLT-V83 touchscreen at the
factory.
If the film must be attached by the customer or replaced:
Turn off the DLT-V83.
Use a neutral glass cleaner without ammonia or isopropyl alcohol applied to a lint-
free cloth.
Wipe off the touchscreen with it.
Then use distilled water to remove any residual glass cleaner.
NOTICE: Physical damage
Never use any kind of chemical solvent, acidic or alkali solution.
Do not use any abrasive glass cleaner or cloths that could scratch the touchscreen.
Make sure that the surface of the touchscreen is free of dust and other particles.
Position the protective film with the adhesive side facing downwards tight at one
corner of the viewing window.
Carefully press on the foil.
Then using a wiper (wooden wiper) to push out any air bubbles to the corners.

Table of Contents

Other manuals for Advantech-DLoG DLT-V8310

Related product manuals