EasyManua.ls Logo

Advantech-DLoG DLT-V8310 - Antenna Solutions for Use in Germany; Wi-Fi Configuration with SCU, LCM or WZC

Advantech-DLoG DLT-V8310
178 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Configuration
Page 48 of 178 DLT-V83 Series Manual V1.31 Advantech-DLoG
6.4.2. Antenna solutions for use in Germany
The Advantech-DLoG antenna solutions are based on the prevailing IEEE 802.11
standard. This standard allows wireless data transfer at rates from 1 Mbps to 54 Mbps
(300 Mbps if using IEEE 802.11n) using the 2.4 GHz and 5 GHz frequency band.
CAUTION
Radiation emissions from Wi-Fi.
In Germany according to regulations published in the gazette 89/2003 of the RegTP
(regulating body for telecommunications and mail, now: “Bundesnetzagentur) -
Federal Network Agency for electricity, gas, telecommunications, post and railway -
the maximum permissible transmitting power, EIRP (Equivalent Isotropically
Radiated Power), in the 2.4 GHz frequency band is set at 20 dBm (100 mw).
Set the transmitting power of the Advantech-DLoG antenna so that the
permitted EIRP limit value is complied with.
6.4.3. Wi-Fi configuration with SCU, LCM or WZC
A default profile with basic settings for Wi-Fi operation is defined at the factory.
To create a custom profile, please use the Wi-Fi configuration program that is
preinstalled on your DLT-V83.
Depending on the Wi-Fi driver used, the following configuration programs are available:
Configuration program
Summit Client Utility (SCU) Password: SUMMIT
(Upper case mandatory)
Laird Connection Manager (LCM) Password: SUMMIT
(Upper case mandatory)
Windows Zero Configuration (WZC) No password required

Table of Contents

Other manuals for Advantech-DLoG DLT-V8310

Related product manuals