Unpacking, transporting and storing the device
Advantech-DLoG DLT-V83 Series Manual V1.31 Page 29 of 178
WARNING
Personal injury due to fire, acid burns, toxic gases.
Store the cable cover with lithium-ion batteries separately from the DLT-V83.
Store the cable cover with lithium-ion batteries separately (no mixed storage)
from acids and other materials.
Store the DLT-V83 and accessories in cool and dry conditions and comply with
the specified storage temperature (see Specifications below).
Provide for sufficient ventilation of the storage location.
Do not allow water or other liquids to come into contact with the DLT-V83 (use
particular caution with corrosive liquids).
Do not bring into contact with sources of heat or fire, open flame or heaters; do
not bring into contact with fire.
Keep suitable fire extinguishers ready (foam or powder) in accordance with safety
regulations.
Specifications for DLT-V83 with integrated UPS and lithium-ion batteries
Storage temperature -20 to +60 °C
Operating temperature -10 to +50 °C
Charging temperature 0 to +45 °C (internal device temperature)
Relative humidity 10% to 90% at 40 °C relative humidity,
noncondensing
Mechanical vibration
and shock resistance
Class 5M3 according to EN 60721-3-5
US Highway Truck according to MIL-STD 810F
NOTICE: Physical damage
Prevent physical damage due to deep discharge.
Storing the lithium-ion batteries of the DLT-V83 incorrectly will cause them to
discharge completely (deep discharge) and thus damage them irreparably.
Place the DLT-V83 into operation within 3 months of receiving it and charge the
lithium-ion batteries, which are integrated into the cable cover.
If you are not placing the DLT-V83 into operation within 6 months, make sure you
charge it intermediately.
To Next Page
Loading...
