Advantech EKI-7428G Series - Page 124

MANAGING SWITCH
111
Figure 4-83. Management > LLDP > LLDP Port Settings > VLAN Name TLV VLAN Selection
The following table describes the items in the previous figure.
The ensuing table for LLDP Port VLAN TLV Status settings are informational only: Port
and Selected VLAN.
LLDP Local Device Info
The LLDP Local Device Info page allows you to view information regarding network devices,
providing that the switch has already obtained LLDP information on the devices.
To access this page, click Management > LLDP > LLDP Local Device Info.
The ensuing table for Local Device Summary settings are informational only: Chassis ID
Subtype, Chassis ID, System Name, System Description, Capabilities Supported,
Capabilities Enabled and Port ID Subtype.
The ensuing table for Port Status settings are informational only: Port, Selected VLAN and
Detail (click the radio box and click Detail to displays the details).
LLDP Remote Device Info
The LLDP Remote Device Info page allows you to view information about remote devices,
LLDP information must be available on the switch.
To access this page, click Management > LLDP > LLDP Remote Device Info.
Figure 4-84. Management > LLDP > LLDP Remote Device Info
Table 4-81. Management > LLDP > LLDP Port Settings > VLAN Name TLV VLAN
Selection
Item Description
Port Select Enter the port number to associated with the TLV selection.
VLAN Select Select the VLAN Name ID to be carried out (multiple selection is allowed).
Apply Click Apply to save the values and update the screen.