MANAGING SWITCH
46
LAG Management
Link aggregation is also known as trunking. It is a feature available on the Ethernet gateway
and is used with Layer 2 Bridging. Link aggregation allows for the logical merging of multiple
ports into a single link.
To access this page, click L2 Switching > Link Aggregation > LAG Management.
Figure 4-18. L2 Switching > Link Aggregation > LAG Management
The following table describes the items in the previous figure.
The ensuing table for LAG Management Information settings are informational only: LAG,
Name, Type, Link State, Active Member, Standby Member, Edit (click to modify the settings)
and Clear (click to load default settings).
Table 4-16. L2 Switching > Link Aggregation > LAG Management
Item Description
LAG Click the drop-down menu to select the designated trunk group:
Trunk 1 ~8.
Name Enter an entry to specify the LAG name.
Type Click the radio button to specify the type mode: Static or LACP.
Ports Click the drop-down menu to select designated ports: FE1-8 or GE1-2.
Apply Click Apply to save the values and update the screen.
To Next Page
Loading...