MANAGING SWITCH
48
LACP Priority Settings
The LACP Priority Settings page allows you to configure the system priority for LACP.
To access this page, click L2 Switching > Link Aggregation > LACP Priority Settings.
Figure 4-20. L2 Switching > Link Aggregation > LACP Priority Settings
The following table describes the items in the previous figure.
The ensuing table for LACP Information settings are informational only: System Priority.
Table 4-18. L2 Switching > Link Aggregation > LACP Priority Settings
Item Description
System Priority Enter the value (1-65535) to designate the LACP system priority.
Apply Click Apply to save the values and update the screen.
To Next Page
Loading...