MANAGING SWITCH
61
To access this page, click L2 Switching > Multicast > IGMP Snooping > IGMP Querier.
Figure 4-32. L2 Switching > Multicast > IGMP Snooping > IGMP Querier
The following table describes the items in the previous figure.
The ensuing table for IGMP Querier Status settings are informational only: VLAN ID,
Querier State, Querier Status, Querier Version and Querier IP.
IGMP Static Groups
To access this page, click L2 Switching > Multicast > IGMP Snooping > IGMP Static
Groups.
Figure 4-33. L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups
The following table describes the items in the previous figure.
Table 4-30. L2 Switching > Multicast > IGMP Snooping > IGMP Querier
Item Description
VLAN ID Select the VLAN ID to define the local IGMP querier.
Querier State Select Disable or Enable to configure the VLAN ID (IGMP Querier).
Querier Version Select the querier version (V2 or V3) designated to the selected VLAN ID.
Apply Click Apply to save the values and update the screen.
Table 4-31. L2 Switching > Multicast > IGMP Snooping > IGMP Static Groups
Item Description
VLAN ID Select the VLAN ID to define IGMP static group.
Group IP Address Enter the IP address assigned to the VLAN ID.
To Next Page
Loading...
Need help?
General
