R3131 Spectrum Analyzer Operation Manual
3.3 Menu Function Descriptions
3-36
this setting.
LOW: Performs the next peak search for all the peaks under the
display line. The display line can be adjusted from this
setting.
2/2, more Returns to the Peak (1) menu.
Sig Track ON/OFF Toggles the signal track function on or off.
ON: Sets the marker frequency to the center frequency for
each sweep, after performing the peak search for the
same peak.
OFF: Turns off the signal track function.
Sound Displays the Sound menu, and demodulates the sound at the
marker.
Sound AM/FM Toggles between AM and FM demodulation.
Volume Allows you to set the demodulated sound volume. You can set the
sound volume from a range of 1 to 16.
MKR Pause Time Allows you to set the duration of the pause used during
demodulation.
Squelch ON/OFF Toggles the squelch function on or off.
ON: Displays the squelch line which indicates that sound
carrier levels below this line are not demodulated. The
squelch line can be adjusted when the squelch function
is activated.
OFF: Removes the squelch line, and turns off the squelch
function.
Sound Off Turns off the sound demodulation function.
Marker Off Turns off all marker functions.
1/2, more Displays the Marker (2) menu.
Apr 10/98
To Next Page
Loading...
Need help?
General
