Aeroflex 2023A - SINAD Mode

REMOTE OPERATION
5-32
SINAD mode
SINAD
[not used alone]
:AVERAGE
Set number of averages (1 to 127)
Data type :
Decimal Numeric Program Data
Allowed suffices :
None
Default suffix :
None
Example:
:SINAD:AVERAGE 10
:UNWTD
Set no weighting filter
:CCITT
Set CCITT weighting filter
:CMESS
Set C-MESS weighting filter
:ENABLE
Enable SINAD mode
:DISABLE
Disable SINAD mode
:AUTO
:VALUE <nrf>
Select and set auto SINAD target value
:SEEK
Select and start auto SINAD
:PAUSE
Select and stop auto SINAD
Examples:
:SINAD:AVERAGE 10 Sets 10 averages
:SINAD:CMESS Sets C-MESS weighting
filter
:SINAD:ENABLE Start SINAD measurements
:SINAD:AUTO:VALUE 20.0 Select and set 20 dB
auto SINAD
SINAD?
Prepares message containing information on SINAD mode in the following
format:
:SINAD:AVERAGE <nr1>;<filter type>;<mode>
Example:
:SINAD:AVERAGE 10;CMESS;AUTO
SINAD:VALUE?
Returns measured SINAD in dBs
Example:
:SINAD:VALUE?
22.57
SINAD:AUTO:VALUE?
Returns target SINAD set in dBs
Example:
:SINAD:AUTO:VALUE?
20.0
SINAD:AUTO:STATE?
Returns auto-leveling status in the following format:
:READY
State returned after selecting and setting AUTO SINAD target value
:SEEKING
State returned after selecting and starting AUTO SINAD
:PAUSED
State returned after selecting and stopping AUTO SINAD
:COMPLETE
State returned after auto-leveling has finished
Example:
:SINAD:AUTO:STATE?
SEEKING