REMOTE OPERATION CARRIER FREQUENCY COMMANDS
4-37
[SOURce]:FREQuency:PHASe:SENSitivity
Description: Sets the sensitivity of the rotary control when setting up carrier phase shift.
Parameters: <CPD>
Valid values: FINe (0.036°)
MEDium (0.360°)
COARse (1.44°)
*RST sets: FIN
[SOURce]:FREQuency:PHASe:SENSitivity?
Description: Queries the sensitivity of the rotary control.
Parameters: None
Response: <CRD>
Returned values: FIN | MED | COAR
[SOURce]:FREQuency:SWEep:DWELl
Description: Sets the time per sweep step for the carrier frequency.
Parameters: <NRf>
*RST sets: 50 ms
[SOURce]:FREQuency:SWEep:DWELl?
Description: Queries the time per sweep step for the carrier frequency.
Parameters: None
Response: <NR2>
Returned values: Time in s.
To Next Page
