Revision History Ensemble Epaq Hardware Manual
Appendix B: Revision History
Revision Date
2.04.00 June 3, 2015
l General revision / metalwork updated
l Added RoHSstatement to EC Declaration of Conformity
l Added Input Power equation:Section 1.1.
l Updated PSOoutput specification: Section 3.7.1.
l Fuse information updated: Section 5.5.
2.03.00 June 13, 2013
l Declaration of Conformity updated
l Motor ground wire removed from ferrite (Figure 2-5, Figure 2-
10, Figure 2-12).
l Software options added to Table 1-2
l Added Tightening Torque specification:Section 2.2.
l Section 2.2.3. updated
l Added Section 1.4.
l Added JINEMA information:Section 4.1.
l Section 3.7. and Section 3.7.1. updated
2.02.00 January 27, 2011 Revision changes have been archived.If you need a copy of this
revision, contact Aerotech Global Technical Support.
2.01.00 September 13, 2010
2.00.00 April 26, 2010
1.02.00 September 17, 2008
1.01.00 July 17, 2008
1.00.00 January 8, 2008
Prelim August 29, 2006 New manual
www.aerotech.com Appendix B 91
To Next Page
Loading...
Need help?
General
