Aerotech Ensemble Epaq - Mechanical Specifications; Table 1-5: Physical Specifications

Ensemble Epaq Hardware Manual Introduction
1.2. Mechanical Specifications
Mount the Epaq so free airflow is available at the rear and along the sides of the chassis for standard cooling.
Allowance must also be made for the rear panel connections and cables.The outline dimensions for the Epaq
are shown in Figure 1-3.
W A R N I N G : Use both handles to lift and carry the Ensemble Epaq.
All Epaq chassis’s are built to the user’s specifications, with the requested options, causing a variation in the
actual product weight.
Table 1-5: Physical Specifications
Description Weight
Chassis Weight 10 kg (600 W power supply and 6 amplifiers installed)
Footprint 17.2" (W) x 12.3" (D) x 7.0" (H)
10 Chapter 1 www.aerotech.com