Aerotech Ensemble Epaq User Manual

Electrical Safety Ensemble Epaq
Safety Procedures and Warnings
Read this manual in its entirety before installing, operating, or servicing this product. If you do not understand
the information contained herein, contact an Aerotech representative before proceeding. Strictly adhere to
the statements given in this section and other handling, use, and operational information given throughout
the manual to avoid injury to you and damage to the equipment.
The following statements apply wherever the Warning or Danger symbol appears within this manual. Failure
to observe these precautions could result in serious injury to those individuals performing the procedures
and/or damage to the equipment.
D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.
1. Disconnect electrical power before making any mechanical adjustments or performing
maintenance.
2. Disconnect electrical power before performing any wiring.
3. Residual voltages greater than 60V may be present inside Ensemble Epaq chassis for
longer than 10 seconds after power has been disconnected.
4. To minimize the possibility of electrical shock and bodily injury, extreme care must be
exercised when any electrical circuits are in use. Suitable precautions and protection must
be provided to warn and prevent persons from making contact with live circuits.
5. Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
6. Make sure the Ensemble Epaq and all components are properly grounded in accordance
with local electrical safety requirements.
7. Operator safeguarding requirements must be addressed during final integration of the
product.
W A R N I N G : To minimize the possibility of electrical shock, bodily injury or death the
following precautions must be followed.
1. Use of this equipment in ways other than described by this manual can cause personal
injury or equipment damage.
2. Moving parts can cause crushing or shearing injuries. Access to all stage and motor parts
must be restricted while connected to a power source.
3. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid
potential hazards.
4. Do not expose the Ensemble Epaqto environments or conditions outside of the listed
specifications. Exceeding environmental or operating specifications can cause damage to
the equipment.
5. If the Ensemble Epaq is used in a manner not specified by the manufacturer, the protection
provided by the Ensemble Epaq can be impaired and result in damage, shock, injury, or
death.
6. Operators must be trained before operating this equipment.
7. All service and maintenance must be performed by qualified personnel.
8. The Ensemble Epaq is intended for light industrial manufacturing or laboratory use. Use of
the Ensemble Epaq for unintended applications can result in injury and damage to the
equipment.
www.aerotech.com xi

Aerotech Ensemble Epaq Specifications

General

Brand	Aerotech
Model	Ensemble Epaq
Category	Controller
Language	English