To Next Page

To Previous Page

Chapter 1: Site Preparation – Process: Site Prep Checklist

Chapter 7, Site Preparation –

Compressed Air and Vacuum

Requirements

[ ] Compressed air line installed?

[ ] Vacuum plan done?

[ ] How many solenoids needed? _____

[ ] Vacuum equipment installed?

Chapter 8, Site Preparation –

Communications Cabling

Requirements

[ ] Local area network planned?

[ ] LAN cabling installed?

NOTE

The remaining items go beyond site preparation, but must be completed before installation. See the System and

Support Bay Uncrating Instructions (p/n’s E4000-90013 and E4000-90014 for a Series 3 system) attached to the ramp

of the shipping pallet and Chapter 9, Site Preparation – Receiving and Moving Instructions for further information.

Chapter 9, Site Preparation –

Receiving and Moving

Instructions

[ ] Insurance coverage arranged for arrival?

[ ] System inspected for physical damage?

[ ] Shipment inventoried?

[ ] Equipment moved to installation site?

[ ] Testhead unpacked (Tri-wall box removed, but not removed from the pallet.). The

Agilent service representative will unpack the smaller boxes and move the system as

part of installation.

1. See Chapter 6, Site Preparation – Power Requirements for more information.

Table 1-1 Site preparation checklist (continued)

Task Checklist

Agilent Technologies 3070 Series User Manual

Questions and Answers: