4-6 Agilent 4155C/4156C User’s Guide Vol.1, Edition 11
File Operations
Storing Setup or Results Data
Storing Setup or Results Data
1. To store data to a file in the current mass storage device, press Save key to
display the SAVE setup fields.
2. To change the mass storage device:
a. Press System key.
b. Select FILER softkey to display the SYSTEM: FILER screen.
c. Specify the new mass storage device.
d. Select SAVE softkey to display the SAVE setup fields.
3. In the NAME field, do one of the following:
• To store the data in a new file on a diskette, enter a file name that is a
maximum of 8 characters (for DOS format) or a maximum of 6 characters
(for HP LIF format). For HP LIF format, do not use "_" as the last character
of the filename.
• To store data in a new file on the network file system, enter a file name, 36
characters maximum. The file name and directory path combined can be 58
characters maximum.
• To store data in an existing file, select FILE CATALOG softkey. Use the
rotary knob to move the cursor to the correct file, then press SELECT
softkey.
• To store data in an internal memory, select MEM1, MEM2, MEM3 or
MEM4 softkey.
FUNCTION:SAVE
TYPE
NAME
COMMENT
To Next Page
Loading...
Need help?
General
