3-8 Agilent 4155C/4156C User’s Guide Vol.1, Edition 11
Connecting to Network
Using Network
Using Network
This section explains the network function of the 4155C/4156C, and describes the
following examples of using the NFS server and the print server.
• “Functions”
• “Saving 4155C/4156C Setup Data”
• “Using Remote Printer”
• “Saving Graphics Data”
• “Saving Spreadsheet Data”
Functions
Connecting to a network, the 4155C/4156C can use a remote printer and a NFS
server on the network.
• To use a remote printer
• To mount a NFS server
To use a remote
printer
1. Press the
System key and PRINT SETUP softkey.
2. Select a softkey for the DESTINATION field. For the setup shown in Figure 3-2,
the PRN01 softkey will be enabled.
3. Use the print/plot function to do printing.
If the network printing fails, check the 4155C/4156C setup parameters, setup of the
print server, and operation of the remote printer.
To mount a NFS
server
1. Press the
System key.
2. Select a softkey for the DISK field. For the setup shown in Figure 3-2, the
DATA softkey will be enabled.
3. Use the filer function to do the file operation.
If the 4155C/4156C cannot mount the network file system, check the 4155C/4156C
setup parameters, setup of the NFS server, or permission of the file system.
Note that the FLOPPY softkey unmounts the network file system, and enables the
built-in flexible disk drive.
To Next Page
Loading...
Need help?
General
