Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 2-43
Installation
Maintenance
Maintenance
Maintenance should be performed periodically to keep the 4155C/4156C and
41501A/B in good condition.
Calibration
Calibration and adjustments must be performed periodically so that the instruments
satisfy the specifications, and keep a good condition. It is recommended to perform
the calibration once a year at least. For the calibration and adjustments, contact your
nearest Agilent Technologies Service Center. Trained service personnel will perform
the calibration and adjustments.
Cleaning
Before performing cleaning, turn off the instrument, and disconnect power cable
from the rear panel. Use a dry cloth to clean the external case parts.
To prevent electrical shock, do not perform cleaning when the instrument is turned
on, and do not use a wet cloth.
To Next Page
Loading...
Need help?
General
