Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 2-7
Installation
Inspection
Inspection
This section describes what to do when you receive the 4155C/4156C and
accessories.
1. Inspect the shipment.
2. Verify the 4155C/4156C operation.
To maintain the 4155C/4156C and 41501A/B measurement accuracy specifications,
perform calibration and adjustments once a year.
To Inspect the 4155C/4156C and Accessories
Perform the following inspections when the 4155C/4156C and accessories arrive at
your site.
• Before unpacking any components, inspect all boxes for any signs of damage
that might have occurred during shipment, such as:
•dents
• scratches
•cuts
• water marks
If you suspect any damage, notify your local Agilent Technologies sales or
service office.
• When you open the boxes that contain the 4155C/4156C and accessories, check
the components against the contents lists attached to the boxes.
If anything is missing, notify your local Agilent Technologies sales or service
office.
To Next Page
Loading...
Need help?
General
