5-24 Agilent 4155C/4156C User’s Guide Vol.1, Edition 11
Print/Plot Function
Saving Setup Data Lists
Saving Setup Data Lists
This section describes how to save the setup data list on setup screens, except for the
GRAPH/LIST and KNOB SWEEP screens, as a PCL or HP-GL file.
Before beginning to save the setup data list, check the following:
• SYSTEM: FILER screen
This screen sets the DISK entry field to specify the mass storage device used to
save a PCL or HP-GL file. For more information, see Setup Screen Reference
manual.
• SYSTEM: PRINT/PLOT SETUP screen
This screen specifies the information to save, paper size, and so on. Set all the
entry fields properly. For more information, see Setup Screen Reference manual.
The following entry fields must be set:
Entry Field HP-GL PCL HR PCL
DESTINATION
FORM FEED √√√
LINE √√√
COLUMN √√
COLOR/B/W √√√
PAPER √√√
OUTPUT ITEM √√√
INIT STRING √√√
TRAILER STRING √√√
To Next Page
Loading...
Need help?
General
