Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 4-15
File Operations
Loading Setup or Results Data
If the Setup File does not match the present configuration
If the information in the setup file is different than the current system unit
configuration, the 4155C/4156C will change the setup values when loading the file.
• If the file has an HPSMU setup, but the current system does not have an
HPSMU, two parameters will be changed:
• Voltage Measurement Range: 200 V ⇒ 100 V
• Current Measurement Range: 1 A ⇒ 100 mA
• If you try to load an 4156A/B setup on the 4155C, one parameter will be
changed:
• Current Measurement Range: 10 pA or 100 pA ⇒ 1 nA
File Type
The 4155C/4156C can load the following files:
MES file Measurement setup data file.
STR file Stress force setup data file.
DAT file Measurement result data file. Includes the measurement setup.
MAT file E5250A setup data file.
CST file Customized system data file.
PRO file Measurement setup data file for the 4145 parameter analyzer.
To Next Page
Loading...
Need help?
General
