Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 1-3
Introducing the 4155C/4156C
• Printing and plotting
The 4155C/4156C allows you to print the setup data, measurement results and
screen images on a printer or plotter that is connected to the 4155C/4156C via
GPIB interface, or parallel I/O interface. The 4155C/4156C can also store a
TIFF, PCL, or HP-GL file.
You can also use a remote printer via LAN to make hardcopies.
• Remote control
The 4155C/4156C can be controlled by an external controller via GPIB by using
remote control commands. The 4155C/4156C provides the following command
sets, so you can select the command set suitable for your application.
• 4155C/4156C SCPI (Standard Commands for Programmable Instruments)
command set
• 4155C/4156C FLEX (Fast Language for Execution) command set
• 4145B syntax command set
Also the 4155C/4156C has internal Instrument BASIC, so you can develop and
execute measurement programs by using the 4155C/4156C only, without using
an external controller.
• Agilent E5250A control
The 4155C/4156C enables to control the E5250A Low Leakage Switch
Mainframe with the E5252A Switching Matrix using the setup screens. You can
control the E5250A without an external computer and programs.
To Next Page
Loading...
Need help?
General
