Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 8-27
Specifications
Functions
Data variable display
Up to two user defined parameters can be displayed on
measurement result screen.
Read Out Function
The read out functions are built-in functions for reading
various values related to the marker, cursor, or line.
Automatic Analysis Function
On a graphics plot, the markers and lines can be
automatically located using the auto analysis setup.
Parameters can be automatically determined using
automatic analysis, user function, and read out functions.
User Variable Displays the data on the screen via GPIB or Instrument
BASIC.
Repeating and Automating Test
• Instrument Control
Function control internal or external computer can control the 4155C/4156C
functions via GPIB interface.
Commands set SCPI Commands set
4155C/4156C FLEX Commands set
4145B Syntax Commands set
Program memory Using the 4155C/4156C FLEX Commands set, program
code can be stored in the 4155C or 4156C. Maximum
number of program set is 255.
External instrument
remote control internal Instrument BASIC controller can control external
equipment via GPIB interface.
To Next Page
Loading...
Need help?
General
