Agilent 4155C/4156C User’s Guide Vol.1, Edition 11 8-29
Specifications
Functions
Output
•Display
Display modes graphics and list
Graphics display two-axes (X-Y) or three-axes (X-Y1,Y2) plot of source
current/voltage, measured current/voltage, time, or
calculated USER FUNCTION data.
List display measurement data and calculated USER FUNCTION data
are listed in conjunction with VAR1 step number or time
domain sampling step number. Up to eight data sets can be
displayed.
Display 8.4 inch diagonal color active matrix LCD, 640 dot (H) by
480 dot (V). More than 99.99 % of the pixels on an LCD are
active.
• Hard Copy Functions
Graphics hard copy measured data and all data appearing on the screen can
be output via GPIB, parallel, or network interface to a
supported plotter or printer. PCL and HP-GL formats are
supported (selectable).
Text hard copy print out setup information or measured data list as an
ASCII text via GPIB, parallel, or network interface to a
supported plotter or printer. PCL and HP-GL formats are
supported (selectable).
Hard copy file hard copy output file can be stored to an internal or
network mass storage devices instead of sending it to a
printer or plotter. The data can be stored in PCL, HP-GL,
or TIF formats.
Hard copy via
network interface lpr client capability
To Next Page
Loading...
Need help?
General
