Chapter 7 Analyzing, Transferring, and Printing Measurement Data
Introduction
7-2 Getting Started Guide
7
Introduction
The Agilent 10747F Metrology Software enables you to take the raw
measurement data you collected and analyze the following machine
characteristics:
•accuracy
• repeatability
• mean backlash
•slope
This chapter describes how to use the system to make these analyses. It
also explains how to:
• alter the way the data is displayed on the screen
• transfer the data to a spreadsheet program
• print the data and the analysis
See Chapter 5, “Setting Up the Software for a Measurement,” for
information on saving the data.
NOTE
This guide does not provide instructions for completing each field on each
screen since this information is provided by the online help.
To Next Page
Loading...
