Chapter 7 Analyzing, Transferring, and Printing Measurement Data
Transferring Data to Another Program
7-8 Getting Started Guide
7
Transferring Data to Another Program
To transfer your measurement data to a spreadsheet or other PC program,
follow these steps:
1 On the Analyze Data screen, select Show Data.
The Show Data Set screen is displayed (Figure 7-2).
2 Select Run # or Pos # under Sort By.
This determines if the data will be sorted by run number or by position
number.
3 Select Print to File.
The Print Data to File screen is displayed.
4 Type a file name in the File name box or use the suggested default.
Use the browser to specify the desired drive and folder, then click OK.
The data is saved as an ASCII file with tab separated values, and can now
be used as input to a spreadsheet program or other application software.
After the data is saved, you will automatically return to the Show Data
Set screen.
Setting Up the Data Analysis Graph
To display the Set Up Graph screen, select Set Up Graph on the Analyze
Data screen. The Set Up Graph screen (Figure 7-4) determines (1) the
numerical analysis that is performed on the measurement data and (2)
how the graph shown on the Analyze Data screen is displayed.
To Next Page
Loading...
