Chapter 7 Analyzing, Transferring, and Printing Measurement Data
Setting Up the Data Analysis Graph
7-10 Getting Started Guide
7
You also use the Set Up Graph screen to indicate additional information to
be printed on your printed copy of the graph. This information includes
the following:
• legend
• machine information (See “Entering machine information” for more
information.)
•environmental data
• numerical analysis
Entering machine information
To display the Machine Information screen (Figure 7-5) select Machine
Info on the Set Up Laser or Set Up Graph screen. This screen records
information about the machine you are calibrating. This information is
stored with the data files for the machine and can be printed on the plots
from the Analyze Data screen.
To Next Page
Loading...
