Agilent Technologies 5530 Getting Started Guide

Chapter 3 Installing the Software and Connecting Components
Installing the Metrology Software
Getting Started Guide 3-5
3
Figure 3-3. Sample Windows screen showing the Metrology icon
To start the Metrology Software (general)
The general procedure for starting the Metrology Software is:
1. Click Start on the task bar of the Start menu window (see Figure 3-3)
2. Select Programs on the pop-up menu, see Figure 3-3)
3. Select the Laser Metrology group.
4. Select Laser Metrology (see Figure 3-3), then select the 5530 icon.
To exit the Metrology Software (general)
To exit the software, follow these steps:
1 Return to the Main Menu, then select Quit.
A window is displayed asking if you are sure you want to quit.
2 Select Yes to quit. Select No or press Enter to return to the Metrology
Main Menu.
NOTE Clicking on the “X” button that appears in the upper right corner of the
Metrology screens will not exit the Metrology software.

Agilent Technologies 5530 Specifications

General

Brand	Agilent Technologies
Model	5530
Category	Test Equipment
Language	English