Chapter 4 Using the Agilent 5530 for the First Time
Task 5: Displaying and Saving Data
Getting Started Guide 4-19
4
Saving data
To save your measurement data, follow these steps:
1 Select Main Menu.
The Metrology Main Menu is displayed.
2 Select Save Data.
The Save Data screen is displayed (Figure 4-12).
Figure 4-12. Save Data screen
3 If necessary, select the drive on which you want to save the data.
The default is displayed at the top of the Disk Drives box. To change the
default, follow these steps:
To Next Page
Loading...
