49
Agilent 7890B Gas Chromatograph
Operation Manual
Agilent Technologies
5
Running a Method or a Sequence from
the Keypad
Running Methods from the Keypad 50
Running Sequences from the Keypad 51
This section explains how to load, store, and run a method
or
sequence using the GC keypad, without the use of an
Agilent data system. The keypad can be used to select and
run a method or automated sequence stored in the GC and
run it. In this case, the data generated from the run is
normally sent to an integrator for the data analysis report.
For information on creating a method or sequence using
keypad entry, see Chapter 4, “Methods and Sequences."
To Next Page
Loading...
Need help?
General
