Agilent Technologies 7890B - To Configure Composite Columns

Configuration 10
Operation Manual 161
To configure composite columns
1 Follow steps 1- 7 on page 153.
2 If using an In Segment, scroll to In_Segment Length and
enter the length, in meters. If not using an In Segment,
enter 0 to disable.
3 If using an Out Segment, scroll to Out_Segment Length and
enter the length, in meters. If not using an Out Segment,
enter 0 to disable.
4 If using a Segment 2, scroll to Segment 2 Length and enter
the length, in meters. If not using a Segment 2, enter 0 to
disable.