6 Maintaining Your GC
To Install a Capillary Column with the VI 181
To Remove the VI Interface 185
To Clean the VI 187
To Install the VI Interface 189
To Replace the Filter in the Split Vent Line for the VI 190
To Bakeout Contaminants from the VI Inlet 193
11 Maintaining the FID
Consumables and Parts for the FID 196
Exploded Parts Views of the FID 199
Selecting an FID Jet 201
To Attach a Capillary Column Adapter on an Adaptable FID 203
To Install a Capillary Column in the FID 205
To Replace the FID Collector Assembly 209
To Replace an FID Jet 212
To Perform Maintenance on the FID Collector Assembly 216
To Check the FID Leakage Current 224
To Check the FID Baseline 225
To Install the FID Insulation Cup Assembly (Adaptable FID Only) 226
To Install the Optional FID PTFE Chimney Insert 228
To Bakeout the FID 229
12 Maintaining the TCD
Consumables and Parts for the TCD 232
To Install a Capillary Column in the TCD 234
To Install the Optional TCD Capillary Column Adapter 236
To Install a Capillary Column with the Optional TCD Capillary Column
Adapter 237
To Bakeout Contaminants from the TCD 240
13 Maintaining the uECD
Important Safety Information About the uECD 242
Consumables and Parts for the uECD 244
Exploded Parts View of the uECD 246
To Next Page
Loading...
Need help?
General
